NAMC-xE1/T2

N.A.T. GmbH

Contact:

Heiko Koerte
VP, Director Sales and Marketing

Download:

NAMC-xE1_T1_datasheet.pdf

Description:

NAMC-xE1/T1

Advanced Mezzanine Card (AMC) with 8-, 16-E1/T1 or 4-E3/T3 interfaces

The NAMC-xE1/T1 is an Advanced Mezzanine Card (AMC) in single width, compact-, mid- or full-size format providing access to up to 16-E1/T1 in next generation systems based on MTCA and ATCA standards.
The TDM-to-I-TDM converter connects the on-board E1/T1 interfaces with a Gigabit Ethernet port for system interconnects (I-TDM).
The NAMC-xE1/T1 is dedicated for (tele-)communication applications with extensive need for a high aggregation of multiple E1/T1 interfaces combined with access to switched networks based on high bandwidth Ethernet.
The NAMC-xE1/T1 is used for distributing signaling and payload data to DSP or CPU based processor resources within a MTCA or ATCA system.

- Interfaces at the front panel:
- 8x E1/T1 (NAMC-8E1/T1) or
- 16x E1/T1 (NAMC-16E1/T1)

- Backplane connection
- 2xGbE (port 0 and 1)
- FPGA resource with up to 64-Mbit of Quad Data Rate 2 (QDR2) SRAM
- extensive software support in combination with other N.A.T. AMC boards for any voice/data application in ISDN, SS7, ATM, VoIP or 3G environments.
- Software
- Project License Linux Driver for NAMC-xE1/T1

Categories:

Advanced Mezzanine Card TM Advanced Mezzanine Card TM > AMC Hardware Platform Management Infrastructure Advanced Mezzanine Card TM > AMC Processor modules > Processing Architecture (AMC CPU Module) > Other Architecture (AMC CPU Module) AdvancedTCA® > AdvancedMC Form Factors Supported > AMC Support > (ATCA Node boards w/ AMC) AMC.1 - PCI Express AdvancedTCA® > AdvancedMC Form Factors Supported > AMC Support > (ATCA Node boards w/ AMC) AMC.2 - Ethernet AdvancedTCA® > AdvancedMC Form Factors Supported > AMC Support > (ATCA Node boards w/ AMC) AMC.3 - Storage AdvancedTCA® > AdvancedMC Form Factors Supported > AMC Support > (ATCA Node boards w/ AMC) AMC.4 - Serial RapidIO