zx7300_threequarters.png

ZNYX ZX7300 Payload Node Switch

by

ZNYX Networks

http://www.znyx.com/products/hardware/zx7300.jsp
Contact:
Kevin Austin
Description:
The ZX7300 is an ATCA 3.1 switch device designed for use in an Option 1/9 Payload slot. It implements a switch fabric with 24 ports of GigE in-band switching and four ports of in-band 10GigE. Two of the 10GigE ports are routed to the ATCA Fabric to participate in a dual-star 10G architecture with two 10G Hub switches such as the ZX7200 or ZX7250. The link partner over the backplane can be any device that is Option 1 (1G) or Option 9 (10G) compliant.

An OpenArchitect® control processor is used to manage the switch with all the OpenArchitect® features found in the ZX7200 series products. The processor controls the switch and also provides three Out-Of-Band (OOB) GigE Ethernet ports. Two of the OOB ports are routed to the Base Interface of the ATCA backplane to provide management access via the redundant chassis switch.

The two uplink Ethernet ports utilize SFP+ modules for cabling flexibility, allowing either copper or fiber media and supports 1GigE and 10GigE speeds.
Categories:
AdvancedTCA® AdvancedTCA® > ATCA Switch Boards AdvancedTCA® > ATCA Switch Boards > (ATCA Switches) Fabrics Supported AdvancedTCA® > ATCA Switch Boards > (ATCA Switches) Fabrics Supported > (ATCA Switches) PICMG 3.1 Option 1 (1G Ethernet) AdvancedTCA® > ATCA Switch Boards > (ATCA Switches) Fabrics Supported > (ATCA Switches) PICMG 3.1 Option 9 (10G Ethernet)